Accessories
Sealect Designs Clamcleat Shock Cord Toggle Ball 11/16"
Make pulling lines a cinch. Useful for securing rudders or drop-skegs.$5.50
Information
Sealect Designs Clamcleat Shock Cord Toggle Ball 5/16"
Sealect Designs Clamcleat Shock Cord Toggle Ball 5/16"$3.50
Information
Sealect Designs Deck Bungee Kit
This kit comes with everything that you need to add an additional deck bungee to any kayak.$19.95
Information
Sealect Designs Deck Plate Bag
A drawstring bag closure keeps items inside the bag when removed from the deck plate.$16.50
Information
Sealect Designs Drain Plug and Flange (Red Gasket) Kit
This Drain Plug is designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more watertight seal$4.25
Information
Sealect Designs Footbrace Height Adjuster Kit
In cases where your foot peg makes contact with the underside of your deck, use a pair of Kayak Adjustable Footbrace Height Adjusters to move the mounting location down without the need to drill new mounting holes.$27.95
Information
$5.70
Information
Sealect Designs Kayak Carry Handle and Insert Black
Specifications:Length: 4-1/4"
Width: 7"
Weight: .05lbs
$4.45
Information
Sealect Designs Kayak Deck Fitting Single Loop (6 set)
Specifications:Parts Included:
Kayak Deck Fitting Single Loop (2)
10-32 x 1" Bolt (2)
#10 Flat Washer (2)
10-32 Nyloc Nut (2)
#10 Well Nut (2)
Length: 1-1/4"
Width: 1/2"
Fastener: #10OH
Weight: .01lbs
$7.99
Information
Sealect Designs Open Base Cleat 3" Pair
All SEA-LECT Designs Open Base Nylon Cleats are designed with a molded-in recess in the base which traps sealant in place increasing watertightness.$4.00
Information
Sealect Designs Open Shock Cord Bungee Hook w/ Sleeve (2 Pack)
Use these clips to attach bungee cord to tie down points on your kayak.$2.95
Information
Sealect Designs PVC Heat Shrink 1/2" x 3" (6 Pack)
Useful for cover frayed wires from rudder installations, or for protecting exposed wiring.$10.10
Information
Sealect Designs PVC Heat Shrink 3/8" x 3" (6 Pack)
Useful for cover frayed wires from rudder installations, or for protecting exposed wiring.$7.00
Information
Sealect Designs Replacement Drain Plug (Black Gasket)
This Drain Plug is designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more watertight seal. Replacement plug to go with plug base.$4.75
Information
Sealect Designs Replacement Drain Plug Wide Thread (Red Gasket)
This Drain Plug is designed with a molded-in recess in the base, thus trapping the sealant in place and providing a more watertight seal.$4.75
Information
Sealect Designs Rod Holder Cap & Gasket (Each)
Specifications:Weight: .10lbs
$4.75
Information
Sealect Designs Rod Holder Fitting Sgl Loop (10 Pack)
Specifications:Material: Injected Molded Nylon
Length: 1-1/4"
Width: 1/2"
Fastener: #10OH
Weight: .01lbs
$6.95
Information
Sealect Designs Round Ring Plastic Black 2" (Each)
Specifications:Material: Injection Molded Nylon
Thickness: 3/8"
Circumference: 2"
Weight: .03lbs
$2.35
Information
Seattle Sports Tri-Way LashMates Mini Attachment System Black
Low profile Tri-Way LashMate Minis are molded with a 3 way opening allowing for versatile rigging configuration and easy clip on attachment points for your gear.$11.95
Information
SIC Bullet SUP Bag 11'
Protect your SIC SUP board from minor dings and heat damage with a tailored bag.$209.99 $157.50
Information
Skwoosh Tether Leash
The original SKWOOSH™ Tether - keeps your SKWOOSH™ close to your boat.$2.99
Information
Payment methods
